While
IPTV streaming is essentially a convenient way to access loads of premium content, it can be
prone to some occasional technical issues. Some of the most common problems people have with IPTV relate to
buffering,
freezing,
stuck on loading screens for too long, or
looping issues. As a result, many people are asking themselves why their IPTV loops or freezes.
If you’ve been a victim of any of these problems and want them solved easily and quickly, here’s a list of tips for troubleshooting common IPTV issues. By then, you can improve if not outright solve your buffering issues.
Why Does IPTV Freeze on Occasion?
The number one reason why your IPTV loops or freezes is because the server on the end of your
IPTV provider is
experiencing a lot of load or traffic at that particular time. The odds are that if you are experiencing buffering or freezing on a specific channel, everyone else uses the same IPTV provider as you.
If you want to be certain if the IPTV freezes result from your provider’s server, you can test any other service you may have and see if the freezes or loops are still occurring. Another easy check you can perform at any time is to simply use the internet and browse around for a minute and see if it is responding as expected.
If you’re not getting any long load times while browsing the web and the freezes are only happening on the IPTV, then you can be sure that it is a server-side issue.
While this sounds like things are out of your control, there are a few things you can do to hopefully improve your situation and cut loops or freezes down to a minimum.
Troubleshooting Common IPTV Issues Like IPTV Loops and Freezes
1. Change the Connection Signal from 2.4 GHz to 5.0 GHz
One standard tip you can use to improve IPTV loops or freezes is to see if your device is set to 2.4 GHz. If so,
try changing the WiFi signal setting to 5.0 GHz, as this may improve the signal. Many recent IPTV services work better on 5.0 GHz, and depending on your set-top box and service provider, this could reduce loading times.
2. Use Wired over Wireless Connections during Freezes or Long Loads
Another tip to keep in mind is to consider going for a wired ethernet connection instead of a wireless one. While most set-top boxes come with internal or external antennae, they may not always provide the best connection, especially if your router is far away from the device.
If possible, it is always preferable to use a wired ethernet connection as this method will result in a much more stable internet connection and fewer drops, loads, loops, and freezes.
3. Check for any Concurrent Downloads
If there are computers, gaming consoles, or other devices on your router’s network currently downloading anything, then
pause or stop those processes. They may very well be hogging up the internet and preventing your IPTV stream from loading properly. You may use a
Wi-Fi Blocker to make the router filtration even more convenient.
The next is a related tip but more of a last resort. You may consider
completely disconnecting devices from your wireless network. Some of these devices may be engaged with background processes that could be using up your internet in more subtle ways.
4. Use a VPN to Bypass ISP Throttling
If you’ve covered all of your bases with your own personal network connections and your IPTV provider is experiencing no issues with their servers, then perhaps the culprit is your very own internet service provider.
ISPs are occasionally throttling their clients’ connections, which results in reduced connection speeds and stability during peak traffic hours. Luckily for us, a
VPN or
Virtual Private Network will allow you to
mask your actual IP address so that you can acquire your average connection speeds.
Concluding Thoughts
Remember that there is always something you can do to help remedy your IPTV freezes and loops. Whether it’s making modifications to your router’s setup or supplementing it with a VPN, your IPTV stream probably has some room for improvement.
